Dranetz Visa Dokumentacja Pobierz pdf (Strona 15)

Connecting Voltage Measurement Cables

Measurement cable set

Description: Voltage measurement cables are provided as

standard accessories and are stored in a cable pouch as part of

the measurement cable set, P/N 116042-G3. Each cable set

consists of a cable and alligator clip.

Voltage Rating: Direct connection of all voltage measurement

cables are rated at 600 Vrms max. For measuring voltages

greater than 600 Vrms, potential transformers (PTs) must be

used.

Optional fused voltage adapter

There are two optional fuse accessory kits available for use with

the measurement cables for PX5. One kit (P/N FVA-1) contains

one fused voltage adapter and one measurement connecting

Red cable 50 cm in length. The other kit (P/N FVA-4) contains

four voltage adapters and four measurement connecting cables

50 cm in length (one Red, one Yellow, one Blue, and one Grey).

• WARNING: To avoid the risk of electric shock or burns, always

connect the safety (or earth) ground before making any other

connections.

• WARNING: To reduce the risk of fire, electrical shock, or

physical injury it is strongly recommended to fuse the voltage

measurement inputs. Fuses must be located as close to the load

as possible to maximize protection.

• WARNING: For continued protection against risk of fire or shock

hazard replace only with same type and rating of recommended

fuse. Use only fast blow type fuse which is rated 600V.

Recommended fuse type is Littelfuse, part number KLKD0.30

rated 600V AC/DC, 0.3A fast blow.

• WARNING: Do not replace fuse again if failure is repeated.

Repeated failure indicates a defective condition that will not clear

with replacement of the fuse. Refer condition to a qualified

technician.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Brak uwag

Dranetz Visa Dokumentacja Strona 15